Standard Horizon CPV350 Manual de usuario descargar pdf (Pagina 116)

Page 116 CPV350

[CALL/SET] Key

The [CALL/SET] key functions as the enter key.

Secondary use

Press the [CALL/SET] key to access the DSC OPERATION

menu.

Press and hold the [CALL/SET] key to access the SETUP

menu.

[DW] Key

Watches for a transmission on CH16 and another selected

channel until either signal is received. (Dual watch)

Secondary use

Press and hold [DW] key, intercom operation will operate

between radio and RAM+ Mic.

[NAV] Key

Press this key, when connected to the GPS receiver, the

LCD displays Position Data and Time from the GPS.

[WX] Key

Immediately recalls the previously selected US NOAA

weather channel from any channel location.

Secondary use

Holding down the [16/9] key while pressing the [WX] key

switch the Channel Group.

NOTE

If position is displayed, this icon will be hidden.

[DISTRESS] KEY

Used to send a DSC Distress Call. To send the distress call refer to section “19.2.0

Transmitting a DSC Distress Call.”

21.1 PA/FOG OPERATION

The RAM+ is capable of controlling the 30W Public address, 4 fog horns, bells and whistles.

21.1.0 Operating the PA / Hailer

1. Press and hold the [NAV] key then select “PUBLIC ADRESS” with the

[UP()] or [DOWN()] key.

2. Press the [CALL/SET] key.

3. Press the PTT switch and speak into the microphone.

4. To turn up the PA Volume, press the PTT switch and press the [UP()]

or [DOWN()] keys to adjust the Audio output level. The level can be set

from 0 to 30W.

5. To adjust the listen back volume, (while in listenback mode) press the

[VOL] key, then press the [UP( )] or [DOWN()] key to the desired

listen back volume.

To exit from the PA / Hailer mode, press and hold down the [NAV] key again.

SCAN DW

NAV

CALL

SET

MEM IC

U.I.C

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 143 144

Comentarios a estos manuales

Sin comentarios

Standard Horizon CPV350 Manual de usuario Pagina 116

Comentarios a estos manuales